Clarion RS10 Manual de Instruções descarregar pdf (Página 6)

125

UNGO – Features and Technologies

respond to one to five pulses of the Valet/Override

Switch for the disarm function.

Progressive Door Unlock

For added security, the ProSecurity system can

be configured to unlock the driver’s door only,

leaving the passenger doors locked. Pressing the

UNLOCK button an additional time will unlock the

passenger doors. This option requires additional

parts and labor.

ProSecurity Power Up

The ProSecurity system will store its current state

of non-volatile memory. If the power is lost and

then reconnected the system will recall the stored

state from memory. This means if the unit is in

Valet Mode and the battery is disconnected for

any reason, when the battery is reconnected the

unit will still be in Valet Mode.

ProSecurity Starter Disable

An automatic switch controlled by your system

that prevents the vehicle’s starter from cranking

whenever the system is armed. The vehicle is

never prevented from cranking when the system

is disarmed, in Valet Mode, or if the starter inter-

rupt switch itself fails.

Rear Defroster Activation

During remote start operation, the rear defroster

can be activated. This option requires additional

parts and labor.

Remote Enabled Valet (REV)

The security system will not arm, even with

the remote, but all convenience functions (door

locks, trunk release, etc.) will still continue to

work normally. REV allows access to Valet Mode

without having to disclose the location of the

Valet/Override switch.

Remote Panic

If you are threatened in or near your vehicle, you

can attract attention by triggering the system

with your remote control. Just press the “PANIC”

or “LOCK” button for two seconds, and you will

enter Panic Mode. The siren will sound and the

parking lights will flash for the programmed siren

duration. To stop Panic Mode at any time, press

the “LOCK” button on the remote.

Remote Silent Arm/Disarm Capability

The siren chirps upon arm or disarm can be tem-

porarily eliminated for that one operation only.

The siren arm/disarm chirps can be turned off

permanently, if desired. The siren chirps will also

be eliminated during the warn-away trigger of the

Dual Stage Impact Sensor.

Selectable Ignition Controlled Door

Locks

When the ignition is turned ON, the doors will lock

within 3 seconds and unlock when the ignition is

turned OFF. Ignition controlled lock and unlock

are independent features are can be programmed

separately.

Selectable Siren Duration and Tones

The duration of the siren can be programmed to

either 30 or 60 seconds. Some states have laws

regulating how long a security system can sound.

The multi-tone sirens included with ProSecurity

systems can be easily modified to select desired

tones or single tone.

Short Run Timer / Turbo Timer Mode

Short run turbo mode keeps the engine running

after arriving at your destination for a program-

mable period of time.

Tachometer or Voltage Sensing

ProSecurity remote start systems either use a

tachometer signal or sense the voltage of the

vehicle during remote start activation. These

signals inform the remote start system that the

vehicle has successfully started and is running.

The system’s auxiliary output can be programmed

to operate a factory power release for the vehicle’s

trunk or hatch. If the factory release is not power

activated, an optional trunk release solenoid can

often be added.

1 2 3 4 5 6 7 8 9 10 11 ... 26 27

Comentários a estes Manuais

Sem comentários

Clarion RS10 Manual de Instruções Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Eletrónica para veículos motorizados Clarion RS10